Worm Gear Calculation
| Worm Gear | |
|---|---|
| ~Worm Outside Dia. (Øda1) | |
| Pitch Diameter (Ødo1) | |
| Worm Minor Dia. (Ødf1) | |
| ~Worm Length (L) mm | |
| Axial Pitch (px) mm | |
| Helical Pitch (pz) mm |
| Wheel | |
|---|---|
| ~Biggest Outside Diameter (Øde2) | |
| ~Outside Diameter (Øda2) | |
| Pitch Diameter (Ødo2) | |
| ~Minor Diameter (Ødf2) | |
| ~Length (B) mm | |
| ~Minor Semidiameter (rk) mm | |
| Center Distance (E) mm |
| Calculation of the Transmission/Cycle Ratio of the Driven Gear | |||
|---|---|---|---|
| Transmission Rate | :1=i | ||
| (Z) Cycle (RPM) | |||
| Z' The Path per Cycle (mm) | |||
| Z' The Path per Minutes (mm) | |||
Our company is not responsible for mistakes caused by the programs you use on our site. It is recommended to check the calculations. If you detect a mistake in the calculations, we kindly ask to you report it to our company.
The programs you have used have been registered with number 2021/4615 and protected by the relevant ministry, based on the software and program copyright law no 5846
Technical Teacher
Serdar Sağlam
The programs you have used have been registered with number 2021/4615 and protected by the relevant ministry, based on the software and program copyright law no 5846
It is a crime to copy, move to another place or open to use all or part of our programs and images. our company reserves the right to lawsuit.
Prepared byTechnical Teacher
Serdar Sağlam